Commercial Water Treatment

Commercial Water Treatment – Automatic Backwashing Filters

Choose from our Automatic Backwashing filters for high-flow applications. Chlorine reduction, sediment and turbidity, pH neutralizing, iron and manganese removal, and hydrogen sulfide removal. All our systems feature reliable and durable Fleck® or Clack® control valves with connections up to 3 inches. Media capacity up to 40 cu. ft.

FEATURES

• Highly reliable control valves
• Heavy duty fiberglass tanks
• Premium brands of filtration media
• Engineered for commercial use

BENEFITS

• Automatic backwash (by timer or metered)
• Highly effective performance
• Long equipment life (top quality components)

Commercial Softeners

We carry single and twin tank commercial softeners with top quality components and resin. All our systems feature reliable and durable Fleck® control valves with connections up to 3 inches. Softening capacity from 30,000 to 900,000 grains.

FEATURES

• Metered Fleck® controls
• Heavy duty Structural® tanks
• High performance Dow® resins
• Polypropylene brine tanks
• Optional skid mounting for tanks available
• Engineered for commercial & industrial use

BENEFITS

• Metered to regenerate based on demand
• Reduced water consumption
• Reduced salt usage
• Extended life of Boilers/Water Heaters

Pressure Sets

Clear Solution Services brings nearly twenty years of experience to the design and fabrication of these systems. We have in-house capabilities for the complete system analysis, detailed design, and packaging including control panels and installation supervision.

Systems can be supplied from 10 GPM to the 200 GPM or to client specifications.

The pressure switches are located at the tank and the signals from the pressure switches are sent to the control panel. The control panel directs the pump operation. The first pressure switch is set at a loss of 5 psi from the working pressure. This will cause one pump to operate. The other pressure switch is set at 5 psi below the first pressure switch. This will cause the second pump to turn on & operate in conjunction with the first pump if additional flow rate is required.

The tank is a vertical ASME steel tank that can be painted to customer specifications. Tank will be pressure rated above the working pressure and tested to 1.5 times working pressure. Tanks are fitted with a “heavy-duty” Butyl Diaphragm. A structural steel skid will be provided with the tank, pumps, control panel, pipe, valves, and fittings installed. Unit will be factory tested and fully operational. The skid will be blasted and coated with epoxy.

High Pressure RO’s

Our high pressure systems are a complete watermaker system, with boost pump, fresh water flush, control panel, prefiltration, high pressure pump, and membrane / pressure vessel array, and all 316 stainless steel components.

The Reverse Osmosis process uses a semi-permeable membrane to separate and remove dissolved solids, organics, pyrogens, submicron colloidal matter, viruses, and bacteria from water. The process is called “reverse” osmosis since it requires pressure to force pure water across a membrane, leaving the impurities behind. Reverse Osmosis is capable of removing 95%-99% of the total dissolved solids (TDS) and 99% of all bacteria, thus providing safe, pure water.

Commercial Applications and Summary of Services